We supply optimised materials exceeding the standards to fulfil your orders:

  • Thicknesses up to 250 mm
  • Overwidths: 3.500 and 4.000 mm
  • Lengths up to 16.000 mm
  • Unit weights up to 30 tonnes
  • Test certificates 3.2 DNV GL and 3.2 LR
  • Thickness tolerance compliant with DIN EN 10029 Class C
  • Plate compliant with NORSOK MDS-120 Y20, Y30 and Y40
  • With the options 12,13,18 to 250 mm compliant with DIN EN 10225
Offshore steels
QualitiesMaterial No.Thicknesses (mm)Widths (mm)Lengths (mm)Inspection certificates acc. to
DIN EN 10204
S355G8+M1.88106 –1001.000 – 3.500to 16.0003.2 DNV GL, 3.2 LR
S355G10+N1.881315 – 2501.000 – 3.050to 12.0003.2 DNV GL, 3.2 LR
S355G10+M1.88136 –1001.000 – 3.500to 16.0003.2 DNV GL, 3.2 LR
Norsok MDS-120 Y206–2501.000 – 3.500to 16.0003.2 DNV GL, 3.2 LR
S420G2+M1.88578 –1001.000 – 3.500to 16.0003.2 DNV GL, 3.2 LR
Norsok MDS-120 Y308 –1001.000 – 3.500to 16.0003.2 DNV GL, 3.2 LR
S460G2+M1.88878 –1001.000 – 3.500to 16.0003.2 DNV GL, 3.2 LR
Norsok MDS-120 Y408 –1001.000 – 3.500to 16.0003.2 DNV GL, 3.2 LR
API 2H-504 –1001.000 – 4.000to 16.0003.1
API 2W-506 –1001.000 – 3.500to 16.0003.1

Offshore steels

Offshore oil and gas reserves are produced globally under extreme conditions. The deposits are located in very remote regions, making their production dependent on extreme engineering solutions. The reserves lie deep below the sea floor, temperature fluctuations between summer and winter are extreme and very high winds are common. Offshore steels must withstand these conditions.

In addition, offshore steels are employed in the footings of offshore wind turbines.

The steels employed must be suitable for low temperatures, be characterised by high toughness values and be very easily weldable.

UnionStahl supplies you with offshore steels compliant with EN 10225, NORSOK and API standards in the normalised and thermomechanically rolled supply conditions.

Thermomechanically rolled plates are characterised by their good toughness and weldability.

Among others, the offshore steels stocked by UnionStahl meet the additional requirements 12, 13 and 18 of EN 10225. Option 12 calls for a strain age hardening test to be carried out on plates thicker than 12.5 mm. Option 13 describes the execution of a tensile test in the thickness direction compliant with EN 10164 Class Z35. Option 18 certifies the weldability of the steels.

The heavy plates are covered by test certificates compliant with DIN EN 10204, 3.2 DNV GL and 3.2 LR.

Steel. Trade. Develop

Besides plate, we stock bulb flat steel in grades A, D36, E36 and S355NL. With this and the extensive stock of offshore steel heavy plates, UnionStahl is a reliable partner to quickly meet your short-term requirements.

We produce blanks, such as toothed racks for the feet of jack-up rigs, to stringent tolerances.